 |
| Manufacture Base: |
| Fenghua QITE pneumatic&hydraulic Equipments Manufactory |
| Fengha deke Machinery Manufactory |
Tel: +86-574-88161453, 88161463, 88866639
Fax: +86-574-88161463, 88863939
E-mail: sales@qite-pneumatic.com |
| |
|
| >> HOME >> Products >> Cylinder >> Standard cylinder >> DNC Series ISO6431 Standard Cylinders |
| |
 |
 |
DNC series are the same as FESTO DNC cylinders appearance, with slot on the cylinder barrel and end covers for magnet sensor mounting more conveniently.
*Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safety and with low noise.
*With self-lubricating bearing, the piston rod is lubrication free.
*Magnet and sufficient Fixing styles are available. |
| Ordering Code |
 |
| Specification |
| |
Cylinder Diameter(mm) |
32 |
40 |
50 |
63 |
80 |
100 |
Acting Mode |
Doubic Acting |
Working Medium |
Air |
Fixting type |
Basic type FA FB CA CB LB TC TC-M |
Rod end fitting type |
Basic type TY TI TF TB |
Working pressure(MPa) |
|
MAX.Pressure(MPa) |
1.35 |
Working temperature |
|
Speed range(mm's) |
50~800 |
Cushion type |
Adjustable Cushion |
Cushion stroke(mm) |
24 |
32 |
Joint Size(mm) |
G 1/8 |
G 1/4 |
G 3/8 |
G 1/2 |
** Bore≥125mm,the dimension is the same as ISO6431 Tie-Rod cylinder. |
|
|
